.

STRONG GUARD INSULATING WALLDRYING PLASTER - 3

 

 

PROPERTIES:

The STRONG GUARD Insulating Walldrying Plaster is a dry-mixed mortar that can be used up by adding water to it. The product consists of cement, admixtures and rough grained, riddled quartz. The size of its granules provides more than 30% porosity. The special admixture gives an effective vapour permeable property to the product and ensures dry wall surfaces without salt, nitrate and mould. The product is fibre-strengthened.

 

There are some basic colours available to order:

White Yellow Green Brown Red Grey Black

 

FIELD OF APPLICATION:

  • Plastering of damp walls on both sides as far as 50 cm above the visible moistening. Need to apply a min 1 cm thick layer, but if the wall is 50 cm wide, use max 2,5 cm thick layer.

  • Dryer plastering – rebuilding to living place - of cellars. The degree of moistening determines the thickness of the insulating layer – min 1,5 cm, max 2,5 cm.

  • Plastering on dry surfaces which need continuous airpermeability. Apply min 1 cm thick layer.

 

APPLICATION:

  • Preparation: First remove all the the old plasters, lime, paints, soot and dust from the wall. Incise the horizantal wall joints 0,5 cm deeply and sprinkle the wall with water to avoid the dust.When the surface gets dried apply Strong Guard waterproof bonding adhesive as it is written on its packaging.

After its solidification plastering can be started.

- Plastering: Smooth, homogenous mortar can be made by mixing 25 kgs of plaster
with 4-4,5 litres of water.

The ready mortar can easily be applied both by hand and machine.

Recommended to make a two-coat plastering. First apply a layer with the size of the
required thickness-0,5 cm. When it can bear the next layer, apply the next 0,5 cm layer and
smooth it. When laying distempered plasters the insulation layer needs to be only 0,5 cm
thick.

 

 

ADDITIONAL INFORMATION:

  • Apply the product between +5 oC and +25 oC.

  • The fresh plaster needs protection against frost, rain and hot sunshine.

  • After-treatment: spraying with water. Process is required as at any other cement based plasters.

  • The after-treatment can be carried out only once with this Strong Guard Surface Waterproofing Agent, usage see its packaging.

  • Colourless plasters after drying can be coloured with air-permeable Teluria silicate paints.

  • Distempered plasters provide long-lasting, vivid and wear-resistant colours in 1 work phase.

  • Material needs: 15 kg /m2 in 1 cm thickness.

  • The product keeps its quality for 1 year.

  • Packaging: 25 kg sacks.

  • We provide 10 years guarantee in case of observing the required technology.

 

 

(ÉME): A-17/2008

 

 
 
 
Magyar (HU)English (United Kingdom)Deutsch (Deutschland)Russian (CIS)